tjy123 posted an update 7 months ago
Internal Size:6.9×3.9×2.65mComponents For Control:Schneider
Fan:Siemens MotorHeating:Riello G20 Burner
Wall Panel:EPSRamp:Inside The Booth
Combined Inner Ramp Commercial Paint Booth Coating Full Grilles Energy Saving
1, 7.5KW turbo fan for intake, 7.5KW turbo fan for extraction.
2, Inner ramps for space limited.
3. Air units at back side.
4, Two sets side by side.
5, All LED lights, energy save and more illumination.
6, Color white, blue, orange and red is optional.
7, Full grilles.
8, Full down draft.
Special for the space limited, put the ramps inside, shorten the booth length, air flow from back side, intake and suction units from complete basement, full down draft, two units side by side, option for the electric shutter door between two spray booth, and rail on the floor, car moveable from one booth to another. Specification as below for one unit only.
Inside dimension6900×3900×2650 mm (L×W×H)
Outside dimension8500×4000×3400mm (L×W×H)
Front doorFolding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.
Emergency door1 units, 650×1800mm (W×H), colour: white.
BasementGalvanized steel assemble, 300mm high, quadrate steel support, full grilles made by flat bar and twisted steel, inner ramps.
Wall panelThickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
LightCeiling Lights: 8Units×4Pcs=32Pcs×36W, side lights: 8Units×2Pcs=16Pcs×36W, with LED, lighting boxes are powered coated, illumination ≥1000LUX
Generator cabinetIntake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust systemInlet:1×7.5KW turbo fan, air capacity for each fan: 25000m3/h.
Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend.
Heating systemItaly RIELLO G20 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 200000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend.
Purification systemPre-filter, ceiling filter, fibreglass filter, activated carbon filter.
Control systemSpraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start.
Total power17.5KW (Power supply 1×220V, 3×380V, 50HZ)China Industrial Paint Booth